The Businessman and the Maker
 |
| Businessman v.s. Maker (although Dilbert is certainly not a maker!) |
It was insipred by this former post on the same vein, which rang a bell in Florian Horsh head (so much he very kindly invited me).
I wanted to dig into fundamental differences between regular business and home makers or open source projects, according to me -- and it was good to see a few tie-wearing people nodding! What is interesting is I am now able to talk also from a professional point of view because I could gauge the links between "hand made" and "bought". This is my everyday work (and usually a dream job): creating sensors and/or algorithms that are tailor-made for unusual projects or clients.
As Florian said, my blog is sometime very technical and sometime philosophical and I hope you like it this way (and yes, I plan to post technical stuff soon as it is getting verbose!).
Life is much easier when you think about the thing you makes before you think about how to make money out of it! It also produces more innovation with less risk (and may be less money, but see below).
Most businessmen thinks from the opposite point of view.
And, (at least on the old continent), all "big"investors do look into how much you can make out of... whatever (as long as it looks hard to duplicate). They just forget about who makes it and why it matters more than anything else. OK, there may be a few (very respectable) that do think otherwise, but they are usually former tech people that succeeded as tech people, so they know.
MIY: make it yourself !
My points on why DIY is no economically-impaired, hairy, beatnik, idealist, way of life. By the way it would better be MIY (as Make It Yourself), as it involves some novelty and creativity, in addition to doing it yourself (which is already what every of us should be doing, see, e.g. à la ifixit the "The free repair guide for everything, written by everyone.").Here are keypoints from my speech, and my quite long way home:
- "Home made" certainly does not mean "crappy" (think about craftsmanship). Anyhow, it happens often that an expensive item is hacked badly and beyond warranty so as to address a special need that the market does not consider for different reasons. Now, hand-made products is a direct answer to the owner or client needs: lifespan, energy consumption, geometry... Handmade tools may be better, both functionally and artistically. E.g., who on earth would tell Matthias Wandel he should buy all his tools from the industry instead of making them himself ?
![]()
Matthias Wandel magnificient homemade tilting router lift.
His website and videos are full of wooden marvels, and he does give lots of advices.
- You can fail often: 1) no need to tell, 2) you will learn anyway, and 3) only one success is enough. It suffice you get one outstanding result once and it is more than enough. Absolutely no way to behave like this when you are mass-producing ("better" sacrifice quality to consistency).
 |
| A lot of failures but I eventually made a hobbed bolt better than all I bought so far (and now, it takes me 5 minutes to make another one, because I know how) |
- Learning today improves productivity tomorrow (do not try to make money too early). Your non-monetized time is an investment that pays back in the long term (this is personal experience, people know I have more than one solution and that I can cope with changing specifications, on the fly).
 |
| Patent wars between phone makers do waste money that they would better invest to make better phones for their customers! Btw shall I say here this comes from Reuters? :D |
- Neither bragging nor marketing will work for makers or open source projects: you are judged by the community on facts. While "value engineering" is sane (i.e. try not to over-engineer something and hence make a product less expensive), it most often abused up to planed obsolescence in the industry (reduce willingly the lifespan of the product, make it "fashionable"). No such silliness when there is no "product" as viewed by regular businessmen.
- When you are small and not motivated by money first, there is no such cost as valuing your "intellectual property" (ROI - return of investment), or open a patent war. The two anyhow would stop you from continual innovation (unless you think you need it to raise money from investors. They usually have no care about innovation beyond the fact it is a "technological barrier" (or more precisely, the fact that they think it is, even when it means you depart from your very own initial goal!). I like how Sanjay says he would better upgrade and innovate than fight with the Chinese copycats of his very nice all E3D all-metal hot end (too bad I cannot find the quote anymore!)
- Be the first and share it else someone will do it before you (or worse, a businessman may patent it). And more can be achieved with the community: cheap tools and free howtos.
- Your life is not your money. To quote Coco Chanel (!): There are people who have money, and people who are rich.
May be even more important: YOU can make it, do not be shy!
One slide that was missing because of time and which is back in the online presentation is: you do not need education to make something (the community and free internet is there). Though, if you have some education you may really apply it to the real world. And for sure, if you are self-taught, it may even be better to think out of the box.To quote Einstein himself: "the only thing that interferes with my learning is my education". So feel free, you are free.
The BotBQ, a clever illustration
Jason gave an enlightening speech he gave before me, about his BotBQ, a 3D hamburger printer. Seriously, when I heard about it I first though it was joke.Then I realized the guy really was spending time on it. Since he was also invited as a speaker to the Fabcon, and I did not know how printing food could motivate someone to this extent, I absolutely wanted to see him talk about this at the show.
But I realized he was conveying an important message way beyond the printer itself. Let me quote it from his speech, that you really should listen to "I am not an engineer, I am just a normal guy. So if anybody is discouraged, there is one thing you can take away from me today : if you can do something, or if you think you want to do something, just do it, don't hold back".
Seriously, Jason, you are plain right. "Why?" was a very wrong question in my mind in the very first place, and "Why not?" is the answer anyway!
My speech is here as slides, or there as a 25-minute video.